- 95 -
SDI input signal format
A
is displayed in the screen of this unit during SDI
Mode. It may not be possible to set [REC FORMAT] depending on the signal
format.
≥
For setup of [REC FORMAT], refer to page
.
≥
Confirm that this unit and the SDI output device is correctly connected and
the setup of the signal format for the SDI output device is correct when one
of the following messages is displayed.
j
[INVALID SDI INPUT FORMAT. PLEASE CHANGE RECORD FORMAT.]
j
[INVALID SDI INPUT FORMAT. PLEASE CHANGE IP FORMAT.]
j
[UNDELIVERABLE FORMAT.]
j
[INVALID SDI INPUT.]
∫
SDI signal format that can be input
∫
SDI signal format that is compatible to the recording format of this unit
≥
Do not input an irregular signal or a signal with continuous disruption.
This may cause the device to restart or operate erratically.
≥
Start recording after confirming that an image signal is input.
Recording cannot be started if there is no image signal.
≥
Do not stop the signal being output to the external device or disconnect the cable during recording.
This may cause the clip to split up or prevent the recording from resuming.
About SDI input signal format
SDI output of the
SDI output device
Signal format
3G-SDI
1920
k
1080/59.94p/50.00p
HD-SDI
1920
k
1080/59.94i/50.00i/29.97PsF/23.98PsF/25.00PsF/1280
k
720/59.94p/50.00p
Recording format
Signal format
PS 1080/59.94p
1920
k
1080/59.94p
PS 1080/50.00p
1920
k
1080/50.00p
PH 1080/59.94i, HA 1080/59.94i, HE 1080/59.94i
1920
k
1080/59.94i, 1920
k
1080/29.97PsF
PH 1080/23.98p
1920
k
1080/23.98PsF
PH 1080/50.00i, HA 1080/50.00i, HE 1080/50.00i
1920
k
1080/50.00i, 1920
k
1080/25.00PsF
PH 1080/59.94i FROM 720p,
HA 1080/59.94i FROM 720p,
HE 1080/59.94i FROM 720p
1280
k
720/59.94p
PH 720/59.94p, PM 720/59.94p
PH 1080/50.00i FROM 720p,
HA 1080/50.00i FROM 720p,
HE 1080/50.00i FROM 720p
1280
k
720/50.00p
PH 720/50.00p, PM 720/50.00p
SDI IN 1080/59.94i
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 95 ページ ２０１７年５月２２日 月曜日 午後２時１１分
