- 226 -
[OTHER FUNCTION]
Different menu items are displayed depending on whether this unit is in Recording Mode or Playback Mode.
All default settings are indicated with underlined text.
Set date and time. (
Set the time difference from Greenwich Mean Time. (
)
Sets the boot condition when the AC adaptor or the battery is connected to this unit.
≥
If you turn off the unit without pressing the power button by, for example, disconnecting the AC adaptor from the AC
outlet, the unit will not memorize the zoom and focus positions, iris and gain values, and shutter speed at that point
in time. To have the unit remember the last-used positions and values when it is turned on, follow either of the steps
below to have it memorize them.
j
Turn off the unit by pressing the power button.
j
Switch to Playback Mode.
When about 5 minutes have passed without any operation, this unit automatically turns off to save battery life.
≥
(In case of Playback Mode)
Start up the unit in SDI Mode, and press the MODE button to switch to Playback Mode.
≥
[ECONOMY (BATT)] operates only during SDI Mode. This will not operate during CAM Mode.
≥
This unit will not automatically turn off even if the [ECONOMY (BATT)] is set to [ON] in following cases:
j
During pause of playback
j
PRE-REC is used (
)
j
The unit and a PC are connected with a USB 2.0 cable (
: [OTHER FUNCTION]
#
desired setting
[CLOCK SET]
[TIME ZONE]
[POWER UP OPTION]
[NORMAL]:
This unit is not turned on when the power supply is connected.
[ALWAYS ON]:
This unit turns on automatically when the power supply is connected.
[PREVIOUS STATE]:
The same setup as [NORMAL] is applied when this unit is turned off by pressing the power
button.
The same setup as [ALWAYS ON] is applied when this unit is turned off by the battery
going dead, or when the AC adaptor/battery is removed.
[ECONOMY (BATT)]
[ON]/[OFF]
ヮユワヶ
AG-UMR20PJ.EJ(DVQP1321ZA)_E.book 226 ページ ２０１７年５月２２日 月曜日 午後２時１１分
