24
Chapter
3 Switching 3D
Video
System Configured with 2 Units of AG-HMX100P/HMX100E and 4 Cameras
Two units of AG-HMX100P/HMX100E are used and the
video from up to four cameras is switched to be used as
the input source.
SDI inputs 1 to 4 of the first mixer are used as the
L-channel input sources, while those of the second mixer
are used as the R-channel input sources.
Program outputs from the first and second mixers are
paired to be used as the L-channel and R-channel outputs,
respectively.
3D mode is set to [MODE3-M] on the master unit and
[MODE3-S] on the slave unit (
page 25).
NOTE
When 3D mode is set to [MODE3-S] on the slave unit, all
•
audio outputs are muted. Make audio output from the master
unit.
In order to synchronize two units of AG-HMX100P/HMX100E,
•
be sure to connect a signal generator and input the same
synch signal.
SDI IN 2
DVI-D OUT
PGM
RS-232C
RS-232C
G/L
G/L
SDI IN 1
SDI IN 2
SDI IN 3
SDI IN 4
SDI IN 3
SDI IN 1
SDI IN 4
SDI OUT PGM
DVI-D OUT
PGM
SDI OUT
PGM
L
R
L
R
L
R
L
R
L
R
Professional-use
3D monitor
SDI output
SDI (video and
audio) input
SDI output
DVI-D output
DVI-D output
G/L external
sync signal
G/L external
sync signal
Professional-use
3D-integrated camera
Professional-use
3D-integrated camera
Professional-use
3D-integrated camera
Professional-use camera
Professional-use camera
L-channel
side
R-channel
side
AG-HMX100P/HMX100E
(Set as master unit)
AG-HMX100P/HMX100E
(Set as slave unit)
Professional-use
projector
Professional-use
projector
Program output
Program output
Program
output
Signal generator
