Panasonic AG-CX350E, Operating Instructions Manual

Page: 84 / 199

– 84 –
Chapter 4 Operation — Menu settings
[MARKER]
[CENTER MARKER]
Switch the type of the center marker.
[1] + (large)
[2] Open center (large)
[3] + (small)
[4] Open center (small)
[OFF] Does not display.
(Factory setting: [1])
[SAFETY MARKER]
Selects the type of frame for the safety zone marker.
[1] Box
[2] Corners
[OFF] Does not display.
(Factory setting: [2])
[SAFETY AREA]
Sets the size of the safety zone marker.
The items that can be set are as follows.
f [80%]…[100%]
(Factory setting: [90%])
[FRAME MARKER]
Sets the aspect ratio of the frame marker. The frame marker is not displayed when [OFF] is selected.
The items that can be set are as follows.
f [4:3], [13:9], [14:9], [1.85:1], [2.35:1], [OFF]
(Factory setting: [OFF])
[FRAME COLOR]
Sets the color of the frame marker.
The items that can be set are as follows.
f [WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]
(Factory setting: [WHITE])
[FOCUS ASSIST]
[FOCUS ASSIST SW]
Sets the focus assist method of the <FOCUS ASSIST> button.
[EXPAND] Sets the enlarged display.
[PEAKING] Sets the peaking display.
(Factory setting: [EXPAND])
[EXPAND MODE]
Sets the enlargement display function mode.
[10SEC] Disables the enlarged display function after ten seconds have elapsed.
[HOLD] Enables the enlarged display function until the <FOCUS ASSIST> button assigned to [EXPAND] or the USER button is
pressed or the USER button icon is touched again.
[UNTIL REC] Enables the enlarged display function until performing recording operation.
(Factory setting: [10SEC])
[EXPAND VALUE]
Adjusts the enlargement factor of the enlarged display function.
The items that can be set are as follows.
f [ × 2], [ × 3], [ × 4]
(Factory setting: [ × 2])
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
f [LOW], [MID], [HIGH]
(Factory setting: [MID])