Panasonic AG-CX350E Operating Instructions Manual Download Page 146

Page: 146 / 199

– 146 –

Chapter 6 Playback — Thumbnail operation

Playing back clips

In the [SYSTEM] menu

→

[FREQUENCY], select the system frequency to play back.

In the [SYSTEM] menu

→

[FILE FORMAT], select the file format (MOV or AVCHD) to play back.

In the [SYSTEM] menu

→

[REC FORMAT], select the signal format and codec mode to play back.

Press the <THUMBNAIL> button.

The thumbnail screen is displayed.

Press the <MENU> button while the thumbnail screen is displayed.

The menu is displayed.

In the [THUMBNAIL] menu

→

[PLAYBACK]

→

[CLIP SEL], select the card slot of the memory card to play back.

[ALL SLOT]:

Displays all the clips recorded on every memory card in each card slot. Displays in the order of the clips in card slot 1, and then clips in

the card slot 2.

[SLOT1]:

Displays only the clips recorded on the memory card in card slot 1.

[SLOT2]:

Displays only the clips recorded on the memory card in card slot 2.

[SAME FORMAT]:

Displays only the clips recorded in the same format as the system format.

Clips recorded in the same format match the current settings for each item of the [SYSTEM] menu

→

[FREQUENCY]/[FILE FORMAT]/[REC

FORMAT].

Select the clip to play back. (Fig. 1)

is displayed on the clip that cannot be played back.

To play back the clip with

displayed, check the information of the clip with the clip information, and try operating from the beginning again.

Playback from button operations and operation icons

TCR 12:59:59:23

CH1

CH2

Direct playback bar

Playback operation

Operating procedure

Playback/pause

Touch / or press the <

> button.

Fast-reverse playback

Touch

or press the <

> button. Touch twice to increase the speed.

Fast-forward playback

Touch

or press the <

)

> button. Touch twice to increase the speed.

Stop (return to thumbnail screen)

Touch or press the <

(

> button.

Summary of Contents for AG-CX350E








































































































































































































Search results

Summary of Contents for AG-CX350E

Reviews:

Related manuals for AG-CX350E

Brands by name

Popular brands

Panasonic AG-CX350E, Operating Instructions Manual

Search results

Summary of Contents for AG-CX350E

Reviews:

Related manuals for AG-CX350E

Brands by name

Popular brands