Panasonic AG-CX350E, Operating Instructions Manual

Page: 10 / 199

– 10 –
Chapter 1 Overview — Before using the camera
Before using the camera
r Before using the camera, always check if the built-in battery is not consumed, and then set the date/time.
The date of the internal clock of the camera resets to January 1, 2019 if the built-in battery is exhausted. This may result in the meta data of the clip not
being recorded correctly, and it may not display correctly in the thumbnail screen.
Connect the AC adaptor to the camera or mount a battery when recharging the built-in battery.
The date/time set on the camera is maintained for approximately four months when left in this state for approximately 24 hours.
(The built-in battery is charged even when the power switch is set to <
j > (ON))
For details about setting the time zone and date/time, refer to [TIME ZONE] (page 14) and [CLOCK SETTING] (page 14).
r
When using this product during rain or snow or when at the beach, be careful that water does not get inside the camera.
Water causes damage to the camera and memory card. (Repair may be impossible)
r Keep the camera away from devices that produce magnetism (TVs, TV games, etc.).
f Do not use the camera on top of a TV or around it. Image or audio of the camera may be distorted by the electromagnetic wave emitted from a TV.
f The recorded content may be damaged or image may be distorted by a strong magnetic field produced by speaker or large motor.
f Do not use the camera on top of a microcomputer or around it. Image or audio of the camera may be distorted by the electromagnetic wave emitted
from a microcomputer.
f The camera may not operate properly due to a harmful effect from a device producing magnetism. In such case, turn off the camera and either remove
the battery or unplug the AC adaptor from the power outlet. Then, mount the battery or connect the AC adaptor again. After that, turn on the camera.
r Do not use the camera near a radio transmitter or high-voltage device.
Using the camera recorder near a radio transmitter or high-voltage device may cause harmful effect to the recorded video or audio.
r
Take care so sand and/or dust do not get inside the camera when using the camera at the beach, etc.
Sand and dust may damage the camera and memory card. (Be careful when inserting or removing the memory card)
r AC adaptor, battery charger, and battery
f It may take more time to charge or may not be able to charge when the temperature of the battery is extremely high or extremely low.
f When the charging lamp continues to flash in orange, check if there is any debris, foreign object, or dirt attached to the terminal section of the battery
or the battery charger, and reconnect it correctly. Always disconnect the power plug from the power outlet before removing the debris, foreign object,
or dirt attached to the terminal section.
f The charging lamp will flash in orange when the temperature of the battery is extremely high or low.
Then, charging will start automatically after the battery reaches chargeable temperature.
f If the charging lamp continues to flash even when the battery is at its optimal temperature, the battery or battery charger may be damaged. Consult
the dealer.
f Noise may be generated in radio when the camera is used close to a radio (especially when receiving AM). Keep a distance of 1 m or more when
using.
f Oscillating sound may generate inside the AC adaptor or the battery charger during the use, but this is not a malfunction.
f Always disconnect the power plug from the power outlet after the use. (Power of approximately 0.1 W is consumed by the AC power itself if kept
connected)
f Do not get the terminal section of the AC adaptor, the battery charger, or the battery dirty. Install the device close to the power outlet so the
disconnection device (power plug) can be easily reached.
r Memory cards
f The surface of camera or the memory card may get slightly hot when used for a long period of time, but this is not a malfunction.
f
The amount of memory included on the label of the memory card is the total amount of memory below.
-
Capacity to protect and manage copyright
-
Capacity usable as the normal memory on the camera or a PC.
f Do not give a strong impact to, bend, or drop the memory card.
f Memory card data may become destroyed or erased in the following cases.
-
Electrical noise or static electricity
-
Malfunction of the camera or the memory card
f Do not perform the following operations when accessing the memory card (the card 1 access lamp/card 2 access lamp is flashing in orange).
-
Removing the memory card
-
Disconnecting battery or the AC adaptor without turning off the camera
-
Apply vibration of impact
r Take care not to drop the camera when carrying the camera.
f Strong impact will damage the camera, and it may not operate properly.
f Hold the handle or grip when carrying the camera, and handle it carefully.
r Do not apply insecticide or volatile material to the camera.
f The camera may deform or the paint may peel off when insecticide or volatile material is applied.
f Do not allow the camera to remain in contact with a rubber or vinyl object for a long period of time.