Panametrics TMO2D, User Manual, Page: 63 / 101

TMO2D User’s Manual 55
Chapter 4. Basic Programming
4.9.2 Print System Log
To print the System Log or transmit it over the RS232 serial port:
A System Log printout appears similar to the example shown in Figure 15 below.
Figure 15: A Typical System Log Printout
After printing or transmitting the log, the TMO2D reboots and returns to taking measurements.
4.9.2.1 Done?
To exit the System Log menu, proceed as follows:
SYSTEM LOG MENU
Print System Log?
Press [YES] and the TMO2D transmits the entire log using the RS232 serial port.
SYSTEM LOG MENU
Print System Log?
Press [NO].
SYSTEM LOG MENU
Done?
Press [YES] to leave the System Log menu.
MAIN MENU
System Log?
Press [NO].
MAIN MENU
Resume?
Press [YES] for the TMO2D to resume taking measurements.
00: Factory Init at 10/02/2001 09:34:32
01: Cell Under Range at: 10/02/2001 09:34:33
02: No Calibration at: 10/05/2001 10:14:44
03: Normal Operation: 10/05/2001 10:21:58