Panametrics TMO2D, User Manual, Page: 32 / 101

Chapter 4. Basic Programming
24 TMO2D User’s Manual
4.4.1 Set Time?
After you enter the Setup Menu,
Set Time? enables you to set the current time in 24-hour format. For example, to enter
1:15 pm (13.15 in 24-hour time):
4.4.2 Set Date?
TThe Set Date? submenu is used to set the current date in USA (month, day, year) format. For example, to enter
February 24, 2002:
Note: A period (.) must be used to separate the numbers.
4.4.3 Set Gas/Units/Scaling?
The Set Gas/Units/Scaling? submenu enables you to program the gas label to be displayed, the measurement units
in ppm or %, the input scale (if used with an O2X1), and the measurement units and input range for the input gas.
MAIN MENU
Setup?
Press [YES] to enter the Setup Menu.
SETUP MENU
Set Time?
Press [YES] to set the time.
Enter 24 hour time:
HH.MM [XX.XX]: 13.15
Use the numeric keys to enter a 1, 3,
.
, 1 and 5. (The X’s represent the previous time
entered.)
Enter 24 hour time:
HH.MM [13.15]:
Press [YES] to confirm the entry. Press [YES] again to exit.
SETUP MENU
Set Time?
Press [NO] to proceed to the next submenu.
SETUP MENU
Set Date?
Press [YES] to set the date.
Enter Date (MM.DD.YY):
[XX.XX.XX]:2.24.02
Use the numeric keys to enter a 2, 24 and 02. (The X’s represent the previous date
entered.)
Enter Date (MM.DD.YY):
[2.24.02]
Press [YES] to confirm the entry, and [YES] again to exit.
SETUP MENU
Set Date?
Press [NO] to proceed to the next submenu.
SETUP MENU
Set Gas/Units/Scaling?
Press [YES] to set the input gas, units and scale.