Panametrics TMO2D, User Manual, Page: 45 / 101

TMO2D User’s Manual 37
Chapter 4. Basic Programming
4.7.2 Output Test?
The Output Test? submenu enables the display to send a %Gas value to the output.
For example, to send a %Gas output of 36.39 to Output A:
4.7.3 Relays Test?
The
Relays Test? menu enables you to trip and reset the relays using the keypad to test the operation of external
devices.
For example, to test relay A:
Note:
If you select a calibration relay to test, the TMO2D displays the following warning:
TESTS
Output Test?
Press [NO] to scroll through the Tests Menu, and then press [YES] to select the
Output Test submenu.
Select Output to test:
[A] B done
Use the [NO] or arrow keys to select A, and press [YES] to confirm the selection.
Set Output A to:
%Gas [XX.XX]:
Use the numeric keys to enter 3, 6, ., 3, and 9, and press [YES] to confirm the entry.
(The X’s represent the previously entered setpoint.)
Set Output A to:
%Gas [36.39]:
Press [YES] to return to the calibration submenu.
Select Output to test:
A B [DONE]
Use the [NO] or arrow keys to select DONE, and press [YES] to exit the submenu.
TESTS
Output Test?
Press [NO] to proceed to the next submenu — Relays Test.
TESTS
Relays Test?
Press [NO] to scroll through the Tests Menu, and then press [YES] to select the
Relays Test submenu.
Select Relay to test:
[A] B C D done
Use the [NO] or arrow keys to select A, and press [YES] to confirm the selection.