Panametrics TMO2D, User Manual, Page: 36 / 101

Chapter 4. Basic Programming
28 TMO2D User’s Manual
Data intervals range from 0 to 300 seconds. A data rate of zero will prevent data from passing to the serial port.
SET COMMUNICATIONS
Data Interval [X]: 180
For example, enter 1, 8 and 0 for a 180 sec (3 min) interval. (The X represents the
previously entered data interval.).
SET COMMUNICATIONS
Data Interval [180]:
Press [YES] to confirm the entry, and [YES] again to exit.
SET COMMUNICATIONS
Set Update Rate?
Press [NO] to proceed to the next submenu.
SET COMMUNICATIONS
Set Time Stamp?
Press [YES] to determine if you want the record printed with a time stamp. If you
select this option, the date and time for each data point will go to the serial port.
Print Time Stamp:
YES [NO]
Use the [NO] or arrow keys to indicate whether a time stamp will be printed. Then
press [YES] to confirm the selection.
SET COMMUNICATIONS
Set Time Stamp?
Press [NO] to proceed to the next submenu.
SET COMMUNICATIONS
Done?
Press [YES] to return to the main Setup Menu.
SETUP Menu
Set Communications?
Press [NO] to proceed to the next submenu.