Panametrics TMO2D, User Manual, Page: 46 / 101

Chapter 4. Basic Programming
38 TMO2D User’s Manual
The program rejoins the main Relays Test menu.
Note: Upon selecting the OFF option and pressing [YES], the relay will turn off, and the selection brackets will skip to
ON. Upon selecting the ON option, the relay turns on, and the selection brackets skip to OFF.
4.8 The Calibration Menu
The fifth main menu, the Calibration Menu, enables you to enter measurement parameters and calibration data into
the TMO2D.
The Calibration Menu includes five submenus:
• Select Response?
• Select Compensation?
• Gas Calibration?
• Pressure Calibration?
• Auto Cal Parameters?
(Refer to Figure 28 on page 84 and Figure 29 on page 85 for a flow diagram of the Calibration Menu.)
Warning! Cal-Relay,
Test?
[NO] yes
Use the [NO] or arrow keys to choose to continue (or not) with the test, and press
[YES] to confirm the selection.
Turn Relay A:
[ON] off done
Use the [NO] or arrow keys to select “ON.” Press [YES] to confirm the ON selection.
Turn Relay A:
on [OFF] done
Use the [NO] or arrow keys to select “DONE.” Press [YES] to confirm the selection.
Select Relay to test:
[A] B C D done
Use the [NO] or arrow keys to select “DONE” again, and press [YES] to confirm the
selection and exit.
TESTS
Relays Test?
Press [NO] to exit the Relays Test.
TESTS
Done?
Press [YES] to exit the submenu.
MAIN MENU
Tests?
Press [NO] to proceed to the next Main Menu title — the Calibration Menu.