Panametrics PanaFlow MV80, User Manual, Page: 86 / 184

Chapter 3. Operating Instructions
74 PanaFlow™ MV80, MV82 & MV84 User’s Manual
3.2 Flow Meter Display/Keypad (cont.)
EXIT
ENTER
PanaFlow™ MV
Figure 94: Magnetic Keypad Operation
Figure 95 below shows a picture of the display/keypad. From Run Mode, the
ENTER
key enables access to the Setup
Menus through a password screen. Within the Setup Menus, pressing
ENTER
activates the current field. To set new
parameters, press the
ENTER
key until an underline cursor appears. Use the
  
keys to select new parameters.
The
  
keys advance through each screen of the current menu. When changing a system parameter, all

  
keys are available to enter new parameters. Press
ENTER
to continue.
Note: All outputs are disabled when using the Setup Menus. If changes are not allowed,
ENTER
has no effect.
The
EXIT
key is active within the Setup Menus . When using a Setup Menu,
EXIT
returns you to the Run Mode. If you are
changing a parameter and make a mistake,
EXIT
enables you to start over.
Figure 95: Flow Meter Display/Keypad