Panametrics PanaFlow MV80, User Manual, Page: 45 / 184

Loosen three setscrews
and rotate enclosure
(maximum 180° from
original position)
PanaFlow™ MV80, MV82 & MV84 User’s Manual 33
Chapter 2. Installation
Figure 22: Enclosure Viewing Adjustment
CAUTION!
To avoid damage to the sensor wires, do not rotate the enclosure beyond 180° from the
original position.
1. Disconnect the power from the flow meter.
2. Loosen the three set screws shown in Figure 22 above and rotate the display to the desired position. The
maximum allowable rotation is 180°.
3. Tighten the three set screws and restore power to the meter.