Palo Alto Networks
Specifications •
65
Electrical Specifications and Power Cords
Electrical Specifications and Power Cords
This section describes the PA-7050 firewall electrical specifications and the types of power cords that
can be ordered. The PA-7050 firewall can be ordered with four AC or four DC power supplies.
•
“Electrical Specifications” on page 65
•
“Power Cord Types” on page 65
Electrical Specifications
This table describes the PA-7050 firewall electrical specifications.
Power Cord Types
The PA-7050 firewall ships with four AC or four DC power supplies and four power cords. The DC
configuration supports one type of DC power cord (first item in the following table) that you terminate
to fit your power source. The AC configuration ships with four power cords that you choose from a list
of types described in the following table:
Specification
Description
Maximum rated power output per
power supply (four total)
• PA-7050 firewall AC power supplies
—
2750W
• PA-7050 firewall DC power supplies
—
2500W
Voltage Input
• PA-7050 with AC power supplies
—
(100-240 VAC, 20A, 50-60 Hz)
(Although the range is from 100-240 VAC, you must use 200-
240VAC for full 2+2 redundancy on the power supplies.)
• PA-7050 with DC power supplies
—(-
40 to -60VDC, 60A)
SKU Number
Description
PAN-PWR-DC-CBL-A
Power cable harness with connector for PAN-7050-PWR25-DC and
15 feet leads, customer must terminate
PAN-PWR-C19-AUS
Power cord with IEC-60320 C19 and AS/NZS 4417 cord ends, 3
meters
PAN-PWR-C19-EU
Power cord with IEC-60320 C19 and CEE 7/7 SCHUKO cord ends, 3
meters
PAN-PWR-C19-JP
Power cord with IEC-60320 C19 and NEMA L6-20P cord ends, 3
meters
PAN-PWR-C19-TW
Power cord with IEC-60320 C19 and CNS 10917-3 cord ends, 3
meters
PAN-PWR-C19-UK
Power cord with IEC-60320 C19 and BS 1363 UK13 cord ends, 3
meters
PAN-PWR-C19-US
Power cord with IEC-60320 C19 and NEMA 6-20P cord ends, 3
meters
PAN-PWR-C19-US-L
Power cord with IEC-60320 C19 and locking NEMA L6-20P cord
ends, 3 meters
