![background image](http://html2.mh-extra.com/html/palazzetti/v15/v15_installation-and-maintenance-manual_4376544075.webp)
ITALIANO
ENGLISH
FRANÇAIS
004779194 - 14/03/2023
75
DEUTSCH
ESPAÑOL
9.5 Ordinary maintenance
9.5.1 Flue gas T-pipe maintenance
The flue gas T-pipe must be cleaned by removing
the appliance from its seat and vacuuming the
residues contained inside the T-pipe with an ash
vacuum cleaner.
• Open the door with the handle.
• Remove the safety bracket, by loosening the
two retaining screws.
A
B
Fig. 49
• Pull the appliance out until it reaches the end
of the guides.
• Use an ash vacuum cleaner to remove debris
inside the T-pipe.
Fig. 50
• Proceed in reverse order to reset the appliance.
9.5.2 Auger maintenance
In case the feed pipe that takes the pellets from
the hopper to the combustion chamber gets
clogged, proceed as follows:
• Remove the inspection plate catch (
A
).
• Remove the inspection plate (
B
).
B
A
Fig. 51
• Remove the pellet residues inside the feed pipe
using a screwdriver.
Fig. 52
The cleaning operation must only be performed
by qualified personnel.