PalatiumCare Palcare PAL-211401 Install Manual Download

Page: 42 / 64

PalatiumCare, Inc.

Page 42

2018

site.longName

Optional Setting

Default Value

NONE

Summary

Site's Name.

Description

This is site's name. The site's name can be seen on the PalatiumCare

screen, on email messages, and reports. The site's name is added the

three areas above incase a person manages more than one site or the

site is managed by a management company.

site.lostSignal.recordAgainMins

Optional Setting

Default Value

1440

Summary

Time between recordings lost signal devices for the Maintenance
Report.

Description

This is the number of minutes a device with no signal / lost signal will

be written to the Maintenance Report.

site.lostSignal.timeout

Optional Setting

Default Value

480

Summary

The number of minutes to make sure a device has checked in.

Description

This is number of minutes a device has to check in before

PalatiumCare reports to the end user that the device is missing.

site.lostSignal.timeout.location

Optional Setting

Default Value

480

Summary

The number of minutes to make sure a device has checked in.

Description

This is number of minutes a device has to check in before

PalatiumCare reports to the end user that the device is missing.

Summary of Contents for Palcare PAL-211401




























































Search results

Summary of Contents for Palcare PAL-211401

Reviews:

Related manuals for Palcare PAL-211401

Brands by name

Popular brands

PalatiumCare Palcare PAL-211401, Install Manual

Search results

Summary of Contents for Palcare PAL-211401

Reviews:

Related manuals for Palcare PAL-211401

Brands by name

Popular brands