PalatiumCare Palcare PAL-211401 Install Manual Download

Page: 22 / 64

PalatiumCare, Inc.

Page 22

2018

Updating Firmware

Tech Support.

Click on the

Tech Support

menu.

Click on

Firmware Update

Tab.

Check Current firmware version and Available firmware version.

If newer version is available click

Update Firmware

Button.

Troubleshooting the Required Hardware

PalatiumCare Enterprise Server

Restart Server

Administrator

Click on the

Configuration

Menu.

Click on the

System

Tab.

Click on the

Restart PalatiumCare Server

Button.

Wait 15 Seconds for the Server to restart.

If PalatiumCare system is inaccessible through network connection, and as a last resort,
disconnecting power directly from server for 10 seconds might be required.

Network Coordinator

Restart Network Coordinator

Unplug the power brick, for the wireless receiver, from the AC outlet or battery backup.

Keep the power unplugged for 30 seconds.

Plug the power brick back into the AC outlet or battery backup.

Paging Transmitter

Onboard LED Lights

The paging transmitter has four green and one red LED lights on the left side of the enclosure.

•

The Red Program light is on when the Paging Transmitter is in Programming mode.

•

The Green Power light is on when the Paging Transmitter has power.

•

The Green RF TX light is on when the Paging Transmitter is actively sending a page.

•

The Green RF CD light is on when the Paging Transmitter detects another paging
transmitter in the area sending out a page.

•

The Green Data light is on when the Paging Transmitter is receiving data on the serial
port.

Summary of Contents for Palcare PAL-211401




























































Search results

Summary of Contents for Palcare PAL-211401

Reviews:

Related manuals for Palcare PAL-211401

Brands by name

Popular brands

PalatiumCare Palcare PAL-211401, Install Manual

Search results

Summary of Contents for Palcare PAL-211401

Reviews:

Related manuals for Palcare PAL-211401

Brands by name

Popular brands