WAP-O3G User Manual
24
4.
Mode-Specific Setup
This chapter describes the settings for your WAP-O3G in the four available modes:
Access Point Mode (Section 4.1)
Client Bridge Mode (Section 4.2)
WDS Bridge Mode (Section 4.3)
Repeater (Universal) Mode (Section 4.4)
4.1.
Access Point Mode
NOTE:
The options in the main menu of the WAP-O3G change depending on the current
operating mode of the WAP-O3G. The main menu options discussed in this chapter are those
available in Access Point mode.
In this mode, the WAP-O3G broadcasts a Wi-Fi signal that clients can associate with, as shown in the
figure below.
