WAP-O3G User Manual
21
3.1.5.
Firmware
In the WAP-O3G main menu, in the
System
group, click
Firmware
. The Firmware Upgrade page
appears where you can upgrade your WAP-O3G’s firmware. To perform a firmware upgrade,
you must first download the correct firmware from the Pakedge website.
Click
Browse
and choose the firmware file that you downloaded from the Pakedge
site.
Click
Upgrade.
NOTE
: The upgrade usually takes about 1 minute.
During the firmware upgrade process, do not
turn off the device
– doing so can make the WAP-O3G unusable.
Once the upgrade completes,
the device will restart automatically.
3.1.6.
Time
In the WAP-O3G main menu, in the
System
group, click
Time
. The Time page appears where you
can configure the time on your WAP-O3G unit. You can configure the time manually, or by
connecting the device to an NTP time server.
Manually Set Date and Time
: Type the date and time
Automatically Get Date and Time
: Choose the time zone of your location from the
drop-down list.
User Defined NTP Server
: Type the IP address of the NTP server.
Click
Apply
to save your changes.
