WAP-O3G User Manual
29
ACL Mode:
To block a client from connecting to the WAP-O3G, select
Disabled
from the drop-down list. Or to deny or allow access by clients with a MAC that
you type in a list, select
Allow MAC in the List
or
Deny MAC in the List
in the
drop-down list.
o
If you select
Allow MAC in the List
, only clients whose MAC addresses are on
the list in the table will be able to access the network. All other clients will be
blocked.
o
If you select
Deny MAC in the List
, clients whose MAC addresses are on the list
will be unable to access the network, but all other clients will be granted access.
MAC Address:
In the text box, type a client’s MAC address, and then click
Add
to add the client to the list.
The table at the bottom of the page lists MAC addresses you have blocked or
allowed. To delete selected MAC addresses, or delete all the addresses in the
table, select the address(es) in the list and click
Delete
.
Click
Apply
to save your changes.
4.1.1.5.
WDS
To enable the WAP-O3G to function as a repeater, you must configure the Wireless
Distribution System (WDS). On the WAP-O3G main menu, in the Wireless section, click
WDS
.
The WDS Link Settings page appears.
