WAP-O3G User Manual
30
MAC Address:
In the text boxes, type MAC address(es) of the Access Point(s)
you want to enable for the WDS network.
Mode:
For each MAC address you enter, in the Mode drop-down list, select
Enable or Disable.
Click
Apply
to save your changes.
4.2.
Client Bridge Mode
NOTE:
The options in the main menu of the WAP-O3G change depending on the current
operating mode of the WAP-O3G. The main menu options discussed in this chapter are those
available in Client Bridge mode.
In this mode, you can connect one WAP-O3G to a client by its Ethernet port, as shown below. In
Client Bridge Mode, the WAP-O3G can receive a wireless signal from an Access Point and send the
signal through its Ethernet port to a client.
Summary of configuration for Client Bridge Mode
1.
First setup the Wireless Access Point that that will be broadcasting to the Client Bridge. This
Wireless Access Point is the one broadcasting the Wireless Network you wish to which you
wish to connect the device. Setup as usual (i.e. SSID, IP Address, Channel, Security, etc.)
2.
Connect the O3G to the client and login via your Web Browser.
3.
Configure the O3G by selecting Client Bridge Mode from the Properties page under the
System header.
