Packard Bell EasyNote NS11HR, Service Manual

Page: 92 / 162

CHAPTER 3: Replacing notebook components
86
9
Detach the LCD-webcam cable from the LCD’s underside.
10
Disconnect the LCD-webcam cable from the LCD PCB.
11
Attach the LCD panel brackets and the LCD-webcam cable to the new LCD.
12
Place the new LCD panel on the LCD assembly lid.
13
Reconnect the microphone cable.
14
Secure the new LCD panel with the screws removed in step 5 .
15
Reinstall the LCD front panel by performing steps 6 – 9 of the “Replacing
the LCD front panel” procedure on page 79 .
Make sure the webcam lens is aligned with camera peephole on the LCD
front panel before you secure the panel in place.
16
Reinstall the LCD panel assembly by following the steps 13 – 15 of the
“Replacing the LCD panel assembly” procedure on page 76 .
17
Reinstall the system board by performing steps 19 and 20 of the “Replacing
the system board” procedure on page 67 .
18
Reinstall the keyboard by performing steps 21 – 24 of the “Replacing the
keyboard” procedure on page 53 .
19
Reinstall the palm rest module by performing steps 14 – 17 of the “Replacing
the palm rest module” procedure on page 48 .
20
Reinstall the optical drive by performing steps 10 and 11 of the “Replacing
the optical drive” procedure on page 46 .