Packard Bell EasyNote NS11HR, Service Manual

Page: 90 / 162

CHAPTER 3: Replacing notebook components
84
Replacing the LCD panel
Tools you need to complete this task:
Screws removed during this task:
•
3 black M2.5×6 (bay cover)
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
5 black M2×3 (keyboard frame - top base side) - Indicated
by A in step 8 of the “Replacing the keyboard” procedure on page 53
•
13 black M2.5×6 (keyboard
frame/palm rest module - base side) - indicated by B in step 8 of the
“Replacing the keyboard” procedure on page 53
•
1 black M2×3 (system board)
•
4 black M2.5×6 (LCD panel hinges)
•
2 black M2.5×5 (LCD front panel)
•
4 chrome M2.5×4 (LCD panel)
To replace the LCD panel:
1
Complete the steps in “Preparing the notebook” on page 37 .
2
Remove the LCD panel assembly by performing steps 2 – 12 of the
“Replacing the LCD panel assembly” procedure on page 76 .
3
Remove the LCD front panel by performing steps 3 – 5 of the “Replacing
the LCD front panel” procedure on page 79 .
4
Disconnect the webcam cable (1) , and then pry the board from the LCD
assembly lid (2) .
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe