Packard Bell EasyNote NS11HR Service Manual Download Page 22

Page: 22 / 162

CHAPTER 1: System specifications

Power savings

ACPI mode

Power Management

Mech. Off (G3)

All devices in the notebook are turned off completely.

Soft Off (G2/S5)

OS initiated shutdown. All devices in the notebook are turned off completely.

Working (G0/S0)

Individual devices such as the CPU and hard disc may be power managed in this
state.

Suspend to RAM (S3)

■

CPU set power down

■

VGA suspend

■

PCMCIA suspend

■

Audio power down

■

Hard drive power down

■

Optical drive power down

■

Super I/O low power mode

Save to Disk (S4)

Also called Hibernation mode. System saves all system states and data onto the
disc prior to powering off the whole system.

Summary of Contents for EasyNote NS11HR



































































































































































Search results

Summary of Contents for EasyNote NS11HR

Reviews:

Related manuals for EasyNote NS11HR

Brands by name

Popular brands

Packard Bell EasyNote NS11HR, Service Manual

Search results

Summary of Contents for EasyNote NS11HR

Reviews:

Related manuals for EasyNote NS11HR

Brands by name

Popular brands