www.packardbell.com
59
7
Detach the mylar tape covering the speaker cable, and then release the
speaker cable from the latches securing the cable.
8
Disconnect the speaker cable from the power button board.
9
Remove the speaker screws, and then remove the speakers.
10
Position the new speakers on the keyboard frame.
11
Secure the speakers with the screws removed in
step 9
.
12
Reconnect the speaker cable to the power button board.
13
Secure the speaker cable on the keyboard frame latches.
14
Cover the speaker cable with mylar tape.
15
Reinstall the keyboard by performing
steps
21
–
24
of the
“Replacing the
keyboard”
procedure on
page 53
.
16
Reinstall the palm rest module by performing
steps
14
–
17
of the
“Replacing
the palm rest module”
procedure on
page 48
.
17
Reinstall the optical drive by performing
steps
10
and
11
of the
“Replacing
the optical drive”
procedure on
page 46
.
18
Reinstall the hard drive by performing
steps
8
and
9
of the
“Replacing the
hard drive”
procedure on
page 41
.
Summary of Contents for EasyNote NS11HR
