Pacific Research Solutions
RI-300e User Manual
Page 64
Speech Word Vocabulary
Data
Word
Data
Word
Data
Word
Data
Word
652
BALDWINSVILLE
676
DEFLECTOR
901
DVR Message #1
926
DVR Message #26
653
BATAVIA
677
DISABLED
902
DVR Message #2
927
DVR Message #27
654
BURLINGTON
678
EDISON
903
DVR Message #3
928
DVR Message #28
655
COOPER
679
ENABLED
904
DVR Message #4
929
DVR Message #29
656
CRESCENT
680
FONTANA
905
DVR Message #5
930
DVR Message #30
657
ELLENBURG
681
FORE BAY
906
DVR Message #6
931
DVR Message #31
658
FAIRPORT
682
LYTLE CREEK
907
DVR Message #7
932
DVR Message #32
659
FALSE
683
MILL CREEK
908
DVR Message #8
933
DVR Message #33
660
FINCHVILLE
684
NEEDLE LIMIT
909
DVR Message #9
934
DVR Message #34
661
INTAKES
685
NORMAL
910
DVR Message #10
935
DVR Message #35
662
LEWISTON
686
ONTARIO
911
DVR Message #11
936
DVR Message #36
663
MONEYPOINT
687
PEN STOCK
912
DVR Message #12
937
DVR Message #37
664
ONEIDA
668
POWERHOUSE
913
DVR Message #13
938
DVR Message #38
665
OVERLOOK
689
RELAY
915
DVR Message #15
939
DVR Message #39
666
PLATTSBURG
690
SOUTHERN
916
DVR Message #16
941
DVR Message #41
667
SWITCHYARD
691
SPILL
917
DVR Message #17
942
DVR Message #42
668
TALCOTTVILLE
692
TRANSFORMER
918
DVR Message #18
943
DVR Message #43
669
TRANSITION
693
TRIPPED
910
DVR Message #19
944
DVR Message #44
670
WELL SITE
920
DVR Message #20
945
DVR Message #45
671
WILSON
921
DVR Message #21
946
DVR Message #46
672
ALARMED
922
DVR Message #22
947
DVR Message #47
673
BEARING
923
DVR Message #23
948
DVR Message #48
674
CALIFORNIA
924
DVR Message #24
949
DVR Message #49
675
CIRCUIT BREAKER
925
DVR Message #25
950
DVR Message #50
S-Cmd 31
CW MESSAGE EDITOR, TONE GENERATOR COMMANDS
Tone messages include the station ID, courtesy tones and telemetry. This command is used to edit and store message data into
the system memory. The messages consist of either tone generator or CW commands in sequence. Each of these commands
consists of a 3-digit value and is used to tell the RI-300’s tone generator what to do. These commands include setting the tone
frequency, CW code speed, CW character, beeps and pauses. The messages are stored in the same memory area as macros.
For this reason, it is important to manage and track the memory usage so as not to damage other data stored in the memory.
There are two types of messages that you will be creating and editing.
1. Messages that are triggered by the controller. These are the most common type of messages and include the station ID,
courtesy and telemetry. S-Command 32 is used to define each message that is played when the associated event occurs.
2. Messages that are imbedded within macros. These messages are usually included with S-Commands in the same macro.
These macros are typically triggered by a user command.
The system memory is used for both macros and messages. This memory is organized with 999 lines of data storage, each line
consisting of 24 digits. All messages and macros must start at the beginning of a line. Each line has a starting number from 001
to 999. Both message triggers and user commands with triggers use the start line address as the starting location of the message
or macro. To edit a message, you must first set a pointer to the start line where you want to start your message. Do this with S-
Command 63. Next, start building your message. For the message to work correctly, you must include a “Start of Message”
command (31 001) as the first entry. The following entries are the message itself (31 XXX). The message is completed with an
“End of Message” command (31 002), then finally an end of data command (64) as the last entry. For the purpose of tracking
the amount of digits stored in memory, the “Start of Message” consumes 2 digits “31”. The “End of Message” command
consumes 1 digit “C”. The end of data command consumes 1 digit “D”. All other message commands consume 3 digits each.
Summary of Contents for RI-310e
