Pacific Research RI-310e, User Manual

Page: 89 / 166

Pacific Research Solutions RI-300e User Manual
Page 81
S-Cmd 59 REMOTE EEPROM INITIALIZE
This command allows you to remotely reset your EEPROM (Non-Volatile Memory) data with factory defaults. You may also
execute this command through a link (another attached RI-300 controller) or from the telephone. This S-Command is the same
as if you were to press the initialization button on the controller and turn the power on. The digital potentiometer gain settings,
however, will not be reset. The serial number of your controller is required to operate this command. The serial number of the
controller is located on the controller. Please make a note of the serial number and keep it in a safe place.
SYNTAX:
59 [Serial number]
READ BACK N/A
STORAGE: N/A
PARAMETERS: The serial number is 8 digits long.
DEFAULT: Your RI-300 Serial number.
EXAMPLE: 59 87654321 Initialize the EEPROM only. This example will not be your serial number
S-Cmd 60 RESERVED FOR FUTURE COMMAND
S-Cmd 61 RESERVED FOR FUTURE COMMAND