Panel Installation
The panel sets are delicate and should be handled with care.
The baffle and panel support bracket (Figure 22) retains the side panels, supports the front end of the ceramic
glass baffle, and has a shield which directs the light from the ceiling of the firebox (available on i30s mod-
els only) down onto the log set (model dependent). It is held in place by two bolts. The bracket and its bolts
should be removed before installing the rear and side panels so that the bolts protruding from the ceiling do
not damage the panels.
Figure 22: Baffle and panel bracket.
Note: The baffle and panel bracket (Figure 22) has a perforated tab at each end (Figure 23). This allows
the tabs to be easily bent against the decorative side wall panels to hold them in place if necesarry.
Use only enough force to hold the panel in place and not so much as to damage the panel.
Push tab against panel
Figure 23: Perforated panel tab.
Side panel support tabs
Baffle support tabs
Figure 24: Baffle and panel bracket supporting
side panels.
Rear panel support posts /
support posts for rear end
of ceramic glass baffle
Figure 25: Rear wall showing panel support posts.
16
130717-44 5055.990-A
i30 TOFINO
