3/4”
Figure 8: Removable handles.
Adjustable leveling bolts
This fireplace comes with two leveling bolts
used to adjust the angle of the front of
the fireplace relative to the wall in which
it’s installed (Figure 6). The bolts are pre-
installed. There is also a single rear leveling
adjustment bolt located at the center of the
bottom floor. Use these adjustments along
with the bubble sight (Figure 7) to level the
Tofino fireplace.
Adjustable Leveling Bolts
Side to side levelling
adjustments
Rear to front levelling
adjustment
Bubble
sight
Figure 6: Leveling adjustments.
Removable Handles
The handles used to lift and maneuver the Tofino into position can be removed in order to accommodate a
narrower horizontal fireplace opening. By removing each of the two handles, a full 1 1/2” can be saved.
Figure 7: Bubble sight.
Handle screws
Figure 9: Removable handle screws.
11
5055.990-A
130717-44
i30 TOFINO