60
SOLVING PROBLEMS (cont.)
Check
Suggested solution
Further checks, if there is still a problem
Is there any sound?
Check that the audio cables are securely
and correctly connected.
Check that you have not muted the sound on the
set-top and/or TV. Adjust the volume on the set-
top and/or TV.
If you can hear only mono sound, first check that
the program is likely to have stereo sound (an old
movie, for example, may not). See also page 61.
Can you see and hear a
DVD that you are
trying to play?
For the signal to loop through the set-
top from a DVD (or similar equipment)
to reach the TV, you must activate
baseband loopthrough by turning off the
set-top.
Check that all the audio and video cables are
securely and correctly connected, including any to a
home theater receiver that you may have installed
in the system.
Can you see only
regular (analog)
channels but not any
digital channels?
The RF-bypass feature may be turned on.
Press the BYPASS button on the
remote control to turn the feature OFF
(make sure the word BYPASS is not
lighted on the front panel).
See also page 61.
YES
NO
YES
NO
YES
Summary of Contents for TDC775D
Page 63: ......
