15
CONNECTING THE EQUIPMENT
On the following pages are diagrams that show you how to connect typical
equipment (HDTV, VCR, DVD player and home theater receiver) to the set-top.
The connected items are shown individually and then in combination (see the
tables, right). Some of the connections may change when extra equipment is
added. For example, when a you add a home theater receiver, some cables that
previously went to the TV can, instead, go to the home theater receiver.
Activating baseband loopthrough for a
DVD or similar equipment
To activate baseband loopthrough, simply put the set-top into standby by pressing
the
POWER
button on the remote (making sure the remote control is set to
control the set-top) or by pressing the
power
button on the front panel. When
the set-top is in standby, the light beside the
power
button is red.
If you activate baseband loopthrough, the following occur:
COMPONENT VIDEO IN
loops to
COMPONENT VIDEO OUT
VIDEO IN
loops to
VIDEO OUT
AUDIO IN
loops to
PRIMARY AUDIO OUT and
SECONDARY AUDIO OUT
DIGITAL AUDIO IN
loops to
DIGITAL AUDIO OUT
OPTICAL AUDIO IN
loops to
OPTICAL AUDIO OUT
Using the TV’s HDMI connector:
Using the TV’s component video and stereo
audio connectors:
HDMI TV (+ optional home theater
receiver)
Set-up A
DVI HDTV (+ optional home theater
receiver)
Set-up B
VCR and HDMI TV
Set-up C
VCR, home theater receiver and HDMI TV
Set-up D
DVD player and HDMI TV
Set-up E
VCR, DVD player, home theater receiver
and HDMI TV
Set-up F
HDTV (+ optional home theater receiver)
Set-up G
DVD player and HDTV
(+ optional home theater receiver)
Set-up H
VCR, DVD player, home theater receiver
and HDTV
Set-up I
Summary of Contents for TDC775D
Page 63: ......
