Pace TDC775D, User Manual

Page: 58 / 63

57
USING THE SETUP MENUS
The Setup menus allow you to make further settings to control how your set-top works. These are available from the TV Guide and should
be fully described in the information provided by the cable service provider. Also there may be on-screen information to explain these
menus.
However, please note there are certain items and settings which may affect how the set-top and TV work. See the table below for
information about these.
Other items and options may be available on these screens. The menus may be subject to change in the future, as the set-top advances with new technology.
Item Setting Options Notes
Cable Box
Setup Front LED
Display Current Time,
Current Channel If set to “Current Time”, the time displays on the front panel when the set-top is switched
on. If set to “Current Channel”, the channel number displays.
AC Outlet Switched,
Unswitched If set to “Switched”, the AC outlet on the set-top’s rear panel is on when the set-top is on,
and off when the set-top is in standby, so any TV that is receiving its power from this AC
outlet will switch off when the set-top is put in standby. If set to “Unswitched”, the AC
outlet is always on, so any TV that is receiving its power from this AC outlet will continue to
receive power whether the set-top is switched on or in standby.
RF Bypass On, Off You must set this to “On” in order to use RF Bypass.
For more information about RF Bypass, see page 40.
Configuration Allows you to view the configuration of the set-top.
Audio Default Audio
Track Channel Default,
English, Español,
Français, Português Set the language track that the set-top first attempts to use when tuning to a channel.
“Channel Default” means the set-top will use the default audio track for the program.
Selecting a language means the set-top will use the corresponding language track, if available.
Optimal
Stereo Selecting this option enables the set-top to regulate the volume to minimize sudden changes
in volume, for example during a commercial break.
Audio
Output TV Speakers,
Stereo, Advanced If you select “Advanced”, further settings are displayed, allowing you to set the Compression
(to None, Light or Heavy) and the Stereo Output (to Mono, Stereo or Matrix Stereo).
Screen position This allows you to adjust how the picture displays in the TV screen.