58
SOLVING PROBLEMS
If the installed system does not seem to be working properly,
first make sure that all the cables are securely connected,
then carry out the following checks, in the order shown.
Check
Suggested solution
Further checks, if there is still a problem
Is anything lighted on
the set-top’s front
panel?
Power may not be reaching the set-top.
Make sure that the power cord is
properly plugged in. If there is a switch by
the wall AC power outlet, switch it to
ON.
Check that the wall AC power outlet is working
(for example by plugging in a lamp).
Try a new power cord.
See also page 61.
Does the remote
control operate the
set-top?
Please see the next page
The set-top may not be turned on.
Check if the light beside the power
button on the front panel is blue. If it is
red, press the power button on the
front panel to turn on the set-top.
Check that nothing is blocking the path from the
remote control to the front panel (or remote eye,
if you are using one). Check that any remote eye is
securely plugged into the set-top.
Check that the remote control is currently set to
operate the set-top (consult the instructions
supplied with the remote control).
If the remote control will still not operate the set-
top, replace the batteries in the remote control.
If there is still a problem, try to operate the set-top
by using its front-panel buttons. If this works, then
the remote control may be faulty. Try a new one.
YES
NO
YES
NO
Summary of Contents for TDC775D
Page 63: ......
