39
TURNING ON AND TUNING IN (cont.)
You should now be able to see on the TV a program that is coming from the set-top. If you cannot
see a program, check that the RF coaxial cables are securely and correctly connected (see the set-up
diagrams). If there is still a problem, check with the cable operator that you are using the correct RF
output channel.
1. When you can see a set-top program on the TV, switch the TV/VCR switch on the VCR to
“VCR”.
If you can still see the picture on the TV, everything is tuned correctly. If the picture disappears, carry
out the following final step.
2. Tune the VCR by setting the VCR’s RF output channel to the same RF channel number as the
set-top and TV (either 3 or 4, as stated by the cable operator).
Everything should now be tuned correctly.
NOTE
Regardless of the program channel number selected on the set-top (and shown on its front-panel
display), the RF output channel number will always be fixed (either 3 or 4, as quoted by the cable
operator). The TV and VCR must be tuned to this channel if you want to watch and record programs
through the RF coaxial cables.
ANTENNA/
RF IN
TV / RF
OUT
ANTENNA/
RF IN
CABLE INPUT
TV
VCR
Find out from the cable operator whether
the set-top’s RF output is channel 3 or
Set the VCR’s RF output to the same
Tune the TV to the same channel number as
the set-top’s RF output (see step 3)
Summary of Contents for TDC775D
Page 63: ......
