70
OPERATION
ENTERING/EDITING A PROFILE CONT'D
28. "Save Profile?" is now displayed. Use the YES Key
to save changes to the profile. If you do not wish to
save the profile, press and release the NO Key and
proceed to step 31.
Figure 99.
Figure 98.
NOTE
If you save this profile by pressing the YES Key, it will replace the profile
that was displayed on the Digital Readout when you pressed and released
the EDIT Key (see NOTE following step 1). If you wish to keep the original
profile recalled in step 1, press the NO Key.
29. "Update Same Profile?" is now displayed.
Use the YES Key to update the existing profile, then
proceed to step 32.
Use the NO Key if you wish to save changes as a
new profile.
Summary of Contents for PROGRAMMABLE THERMOFLO
Page 2: ...i MANUAL NO 5050 0420 REV A...
Page 26: ...21 QUICK START...
