background image

03908 04/19

Important: Retain these instructions for future use.

FOR YOUR SAFETY

If you smell gas:
1.  Shut off the gas to the appliance.
2.  Extinguish any open flame.
3.  If odour continues, immediately call your gas supplier.
Do not store or use gasoline or other flammable vapour 
and liquids in the vicinity of this or any other appliance.

WARNING 

Improper installation, adjustment, alteration, service or 
maintenance can cause injury or property damage.
Read the instructions thoroughly before installing or 
servicing this equipment.

FOR OUTDOOR USE ONLY 
PROPANE GAS

Model No. PH7056 / PH7057

  The ideal solution for extending the outdoor 

entertaining season

  Direct ignition
  Maximum output 40MJ/h
  Adjustable heat output
  Includes wheels
  Operates for approximately 9 hours on a properly  

filled 9Kg propane cylinder

  Includes a safety ‘tip-over’ switch that halts supply of 

gas to the unit should it be accidentally knocked over

  Flame safeguard system for enhanced safety
  Complete with hose and regulator
  For outdoor use only
  Gas certified to Australian standards

STELLAR BLACK

DELUXE PATIO HEATER

Summary of Contents for STELLAR BLACK PH7056









Reviews: