PAC R6000S, Operation Manual

Page: 22 / 95

Page 20 of 92 PAC L.P., All Rights Reserved, 2015
R6000S Operation Manual: Rev. G
FIRE, HARMFUL VAPOR, SKIN IRRITANT HAZARDS!
DEATH OR SERIOUS INJURY COULD OCCUR IF NOT AVOIDED!
Some procedures in this manual may involve handling flammable liquids and
exposure to skin irritants and harmful vapors.
HOW TO PROCEED: Avoid hazard(s) by wearing appropriate Personal Protective
Equipment (PPE) such as goggles, face shields, face masks, or respirators that
should be used while performing this task or operating, servicing, or maintaining
this equipment in general. Also, determine the root cause of the potential
hazard(s) and eliminate or reduce the hazard(s) if possible. Ensure flames and
spark producing materials are kept well away from test areas. Use standard
safety procedures at all times. Consult material safety data sheets (MSDS) for
product safety, storage, and handling information.
OTHER SAFETY AND USAGE STATEMENTS
This equipment has been designed in accordance with EN 61010, “Safety Requirements for Electrical
Equipment for Measurement, Control and Laboratory Use.” It is intended for indoor use only. This
instruction manual contains information, Warnings, and Cautions that must be followed to insure safe
operation and to maintain the equipment in safe operating condition. Use of this product in a manner not
specified may impair the protection provided by the equipment.
Tests performed with this equipment may involve hazardous materials. This instruction manual does not
purport to address all safety concerns associated with these tests. It is the responsibility of the user of this
equipment to establish appropriate safety and health practices and to determine applicability limitations
prior to use.
For safe operation, this equipment must be electrically grounded by way of the protective grounding
connection in the power cord. Do not, under any circumstances, defeat the protective grounding
connection.
SAFETY
Certifications
The system and its components have been designed with safety in mind. The design applies to the use,
the conditions and the instructions described in the documentation. The system:

Is CSA/cCSAus approved.