![background image](http://html1.mh-extra.com/html/ozito/lid-012/lid-012_instruction-manual_1666290029.webp)
Installing a socket adaptor and socket
Pull the quick release chuck (1) forward and insert the hex
shank of the socket adaptor into the quick release chuck
(1). (See Fig. 7)
Release the quick release chuck (1) and slowly pull the
socket adaptor forward until you feel the ring engage with
the groove in the adaptor indicating that the adaptor is
locked in position (See Fig. 8).
Check if the socket adaptor is correctly fitted by pulling on
the adaptor to see if it can be removed. If it cannot be
extracted, the adaptor has been inserted correctly (see Fig. 9).
Select the correct socket for the nut or bolt you which to
tighten or loosen. A socket that is too large will result in
slippage or inaccurate and inconsistent torque, or damage
to the nut or head of the bolt. Insert the square end of the
socket bit into the socket adaptor.
Turning the tool on and off
To turn the tool on, slowly depress the variable speed switch
(5) (See Fig. 10). Release the variable speed switch (5) to stop
the tool.
Variable speed
You can vary the speed of the impact driver by controlling
the amount of pressure applied to the variable speed switch
(5). The tool reaches its max speed when the variable speed
switch (5) is fully depressed (See Fig. 11).
12
OPERATION (cont.)
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
1
5
5