Always switch off the multi function tool before insertion or removal of the
battery (3).
Installing the Battery
1. Insert the battery (3) into the battery recess in
the multi head tool until it clicks into place
(Fig. 2).
Note:
Do not use excessive force when inserting
the battery (3). If the battery (3) does not slide in
easily, it is not being inserted correctly. It is also
possible that there could be damage to the
battery (3), battery terminals and/or the multi
head tool. If there is damage, have the complete tool checked by an electrician or
power tool repairer.
Removing the Battery
Depress both the battery release tabs (4) and remove the battery (3) from the multi
function tool.
Battery
The length of service from each charging cycle will depend on the type of work you
are doing. The battery (3) in this multi function tool has been designed to provide
maximum trouble free life.
To obtain the longest possible battery life, we suggest the following:
•
Charge batteries for 7-9 hours and use the multi function tool until it runs down
and only slowly operates. Repeat this charge and discharge process 4-5 times.
•
Store and charge your battery (3) in a cool area. Temperatures above or below
normal room temperature will shorten battery life.
•
Never store batteries in a discharged condition. Recharge them immediately
after they are discharged.
•
All batteries gradually lose their charge. The higher the temperature the
quicker they lose their charge. If you store your drill for long periods of time
without using it, recharge the batteries every month or two. This practice will
prolong battery life.
INSTALLING OR REMOVING THE BATTERY
9
Fig. 2
