OPERATION
11
Insertion and removal of driver bits and sockets
WARNING!
Always ensure the forward/reverse lever (2) is in the lock
position and remove the battery (4) from the tool before inserting or
removing a bit or socket or when making any adjustments to your tool.
Installing a driver bit
Pull the quick release chuck (1) forward and insert the
hex shank of the appropriate driver bit into the quick
release chuck (1) (See Fig. 3).
Release the quick release chuck (1) and slowly pull the
driving bit forward until you feel the ring engage with
the groove in the bit indicating that the bit is locked in
position (See Fig. 4).
Check if the bit is correctly fitted by pulling on the bit to
see if it can be removed (See Fig. 5). If it cannot be
extracted out of the quick release chuck (1), the bit has
been inserted correctly.
WARNING!
If the driving bit is not properly secured it may be ejected
unexpectedly during operation. This could potentially cause serious
personal injury or injury to others. Always ensure the driving bit is secured
properly before beginning operation.
Driving bit removal
Pull the quick release chuck (1) forward and remove the
driving bit (See Fig. 6).
Fig. 3
!
Fig. 6
Fig.
4
Fig.
5
!
1
1
