USER MANUAL
Control and correction
(Rev. 6)
Ow-RX
63
•
X-rays partially exposed
Possible causes:
•
Rays directed far from the median section of the film
•
Level of the developing liquids is too low, resulting in the partial
development of the film
•
Two or more films placed next to each other in the film processor.
•
Obscured X-rays
Possible causes:
•
Film stored for too long (check expiration date)
•
Accidental exposure of the film to rays
•
Accidental exposure of the film to other sources of natural or
artificial light.
•
Dark line on the X-rays
This line appears when the film is folded excessively.
•
X-rays with traces of electrostatic electricity
When the film is compressed excessively and the air is dry,
electrostatic electricity may be released, which is discharged in the
compression points, on which black branching marks will appear.
•
X-rays with chemical spots
Scattering the developing fluid or fixer on the film before development
and the fixing procedures will create spots on the X-ray; these
spots are:
•
Dark if caused by the developing liquid
•
Light if caused by the fixer.
•
X-rays with loss of emulsion
If the film is left in a hot water bath for too long (for example,
overnight), the emulsion may soften and detach partially from the
base of the film. After development, the film will appear scratched.
Summary of Contents for Ow-RX
