Owandy Radiology Ow-RX, User Manual

Page: 46 / 74

USER MANUAL
General instructions for use
Ow-RX
(Rev. 6)
40
7.1.4 “Function” key (selection of receptor, cone presence and kV
value)
Using the "Function" key it is possible to select:
−
an image receptor
−
the presence of the long cone (SID 30 cm)
−
the value of kV applied to the tube.
1.
Press the "Function" key: the receptor icon will start to flash.
2.
Use the "Increase" and "Decrease" keys to select the type of receptor,
from among:
− Film
− Phosphor
− Digital .
3.
Confirm the selection by pressing the "Function" key; the icon
indicating the presence of the long cone will start to flash
(SID 30 cm) .
4.
Use the "Increase" and "Decrease" keys to select the presence
( ) or absence ( ) of the cone.
5.
Confirm the selection by pressing the "Function" key.
NOTE:
If the cone is not present, the relative icon will not appear on the display.
6.
The value of kV applied to the tube will start to flash.
7.
Use the "Increase" and "Decrease" keys to select the required value
(60 kV / 65 kV / 70 kV).
