![background image](http://html1.mh-extra.com/html/oval/d-160ts-7-e/d-160ts-7-e_instructions-manual_1662156016.webp)
D-160TS-7-E
16
(3) Wiring between converter and sensor
Fig. 8.2
(4) Terminal label and connecting cable color
Converter terminals
Terminals inside sensor
terminal box
Connecting cable color
SIG
SIG
White
0V
0V
Black
SUP
SUP
Red
C1
C1
Green
C2
C2
Yellow
SHIELD
SHIELD
Twist [Red/Black/White], [Yellow/Green], and shielded
cables together and cover the bundle with the
accompanying tube, then connect to SHIELD terminal.
★
Exclusive cable must be used for connecting the converter and the sensor.
★
Either the left or right conduit connection (cable entry) of the sensor terminal box can be used.
★
For wiring connection specification, refer to Section 21. GENERAL SPECIFICATION (2) Converter.
Converter (PA21)
Sensor terminal box
SIG
0V
SUP
C1
C2
SHIELD
SHIELD C2
C1
SUP
0V
SIG
★
Sensor terminal box must be installed using
intrinsically safe installation procedure.
★
If there is wrong wiring in the connection between converter and detector, the converter may not start up
normally even if the power supply is turned ON or an error alarm will be generated.