D-160TS-7-E
21
11. MEASURING MODE
11.1 Measuring Mode Display
Measuring Mode appears after powering on or exiting Setting Mode
explained in section 12, showing the display as figure on the right.
The upper display shows % flow rate.
This display can be switched between % flow rate and MODE by key
operation.
See section 11.3 Switching Display for details.
11.2 Error/Alarm indicator
LCD indicators turn on when an error/alarm occurs.
・
For error, [ERR] indicator turns on in the upper left corner of LCD.
・
For alarm, [ALM] indicator turns on in the upper left corner of LCD.
The upper display shows the error/alarm number and measured value alternately (1 second interval).
The lower display shows the error/alarm description synced with error/alarm number (1 second interval).
交互表示
交互表示
交互表示
%
%
■
Error indicator (e.g.: Sensor error)
■
Alarm indicator (e.g.: Instant flow rate lower limit alarm)
See section 18. ERROR/ALARM LIST for details of error/alarm number and description.
NOTE
:
Alternating
Alternating
Error/Alarm indicators stay on until causes of the error/alarm is resolved.
NOTE
: