22
Inactive alarms can be read from the alarm history. From alarms you
can see the cause of the alarm, where the alarm has come from and
when the alarm has become inactive. (e.g., 19.09.2008 at 15:55:10).
The last 10 alarms can be seen in inactive alarms.
Each active alarm is displayed on a separate row with its activati-
on date. Press OK at the alarm row for more information about the
alarm.
If the controller repeatedly gives an alarm for the same reason, the
number of times the controller has given the alarm appears on the
display.
The controller asks for confirmation before it empties the alarm his-
tory.
Active alarms:
Inactive alarms:
Emptying the alarm history:
Relaying alarm information to a mobile phone:
If a modem has been connected to the controller and
a phone number has been given to which the alarm
is sent, the controller also sends alarm information
to the mobile phone. Alarm information can be sent
to a mobile phone immediately after the alarm has
arrived. The controller first sends information about
the alarm to alarm number 1 and if the alarm is not
acknowledged in 5 minutes the controller sends
the message again to numbers 1 and 2. If the same
alarm is repeated a number of times in a 24 hour pe-
riod, the controller only sends information about 5
alarms / 24 hours.
Alarms
Alarm limits
Active alarms
>
Inactive alarms
>
Empty alarm log
>
Active alarms
17.10.2009 13:29 Outdoor temperatur
mpötila >
19.01.2009 14:12 Supply water temperatur
>
Sensor fault alarm
Outdoor temperatur Error
Received 17.01.2009 20:16:00
Repeated alarm 3 times
Press control knob to acknowledge the alarm
Notice
Empty alarm history
Yes
No
Inactive alarms
19.02.2009 15:02 Outdoor temperatur
>
18.01.2009 21:14 Supply water temperatur
>
15.01.2009 17:45 Supply water temperatur
>
02.01.2009 12:25 Measurement 3
>
Device settings:
Language/ Kieli/Språk
The language of the controller can be changed.
Device settings -> Language/ Kieli/Språk
Press OK,
change language
and press OK.
Language /Kieli/Språk...
Suomi
Svenska
English
Alarms
