10
Factor effecting the room temperature
Delayed room temperature that the controller uses in control (see p. 46).
Room temperature setting set by the user.
Effect of fine adjustment on the room temperature setting (see p. 4 and 48).
Room temperature setting change by the potentiometer (only in H1).
Room temperature drop by week clock or exception calendar.
Room temperature change controlled by the Home/Away switch.
Effect of a “Home” or “Away” command by a mobile phone on the room temperature.
Effect of a “Home” or “Away” control by the controller on the room temperature
Effect of automatic autumn drying on room temperature.
Present room temperature setting determined by the controller.
Example.
The room temperature has been set at 21.0°C.
Fine adjustment raises the temperature 0.5°C.
The controller sets the calculated room temperature at 21.5°C (=21.0+ 0.5).
Basic menu -> H1 (H2) Room temperature info
Delayed room temp. measurement
Room temperature setting
Effect of fine adjustment
Effect of potentiometer
Time program effect on room temp.
Home/Away control by switch
Home/Away control by SMS
Home/Away control by controller
Effect of autumn drying
Calculated room setting =
Explanation
> H1 Radiator heating > Basic menu
Measurements
>
Supply water info
>
Room temperature info
>
Settings
>
>H1 Radiator heating...Room temperatur info
Room temperatur setting
21.0 °C
Effect of fine adjustment
0.5 °C
-----------------------------------
Calculated room setting 21.5°C
Basic menu: Room temperature info
If a room sensor is connected to the controller, you can check the room temperature info to
see which factors determine the room temperature at the time of inspection.
Key words:
H1 Room temperature info
H2 Room temperature info
Send a message: H1 Room temperature info.
The controller sends a room temperature info
from the H1 heating control circuit to your mobile phone that shows you the calculated room
temperature setting that can be used in control. The message can’t be changed or sent back
to the controller.
