Otto Bock Genium 3B1-2, Instructions For Use Manual

Page: 97 / 480

97
Beep
signal Vibration
signal Event Resolution
3x short 3x short Maintenance note:
e.g. service interval has been
exceeded, temporary disruption of a
sensor signal • Use the Cockpit app/remote
control to check the next main­
tenance date for the prosthesis
(see Page 80). Should the date
lie within the next month,
arrange
a maintenance
appointment with the prosthet­
ist. For this appointment, the
prosthetist has to be provided
with the battery charger, power
supply and remote control (if
included) in addition to the
prosthesis.
• Conduct the self-test again by
connecting/disconnecting the
battery charger.
• If the beep signal sounds again
and the maintenance date has
not yet been reached or
exceeded, visit the prosthetist
soon. If necessary, the pros­
thetist will forward the pros­
thesis
to an authorised
Ottobock Service Centre.
• The product can be used
without restrictions. However,
vibration signals may not be
generated.
5x long 5x long
(every
minute) Self-test error • Conduct the self-test again by
connecting/disconnecting the
battery charger.
• If the beep/vibration signal
occurs again, visit your pros­
thetist promptly. If necessary,
the prosthetist will forward the
prosthesis to an authorised
Ottobock Service Centre.
Battery charge level
During the charging process, the current battery charge level is indicated by the LEDs lit on the
side of the charger.
LEDs 0 1 2 3 4 5
Battery
charge level 0%-10% 11%-30% 31%-50% 51%-70% 71%-90% >90%