Otto Bock Genium 3B1-2, Instructions For Use Manual

Page: 80 / 480

80
9.3.1 Switching Bluetooth off/on using the cockpit app
Switching off Bluetooth
1) When the component is connected, tap the symbol in the main menu.
→
The navigation menu opens.
2) In the navigation menu, tap the entry " Functions ".
3) Tap the entry " Deactivate Bluetooth ".
4) Follow the on-screen instructions.
Switching on Bluetooth
1) Turn the component over or connect/disconnect the battery charger.
→ Bluetooth is switched on for approx. 2 minutes. During this time, the app must be started
in order to establish a connection to the component.
2) Follow the on-screen instructions.
→ If Bluetooth is switched on, the symbol appears on the screen.
9.4 Querying the prosthesis status
9.4.1 Query status through cockpit app
1) When the component is connected, tap the symbol in the main menu.
2) In the navigation menu, tap the entry "
Status ".
9.4.2 Status display in the cockpit app
Menu option Description Possible actions
Trip Daily step counter (steps with
the prosthesis side) Reset the counter by tapping
the "
Reset " button.
Step Total step counter (steps with
the prosthesis side) For informational purposes
only
Service Display of the next mainten­
ance date For informational purposes
only
Batt. Current prosthesis charge
level, as a percentage For informational purposes
only
Stb/Act: 58/29 Estimated remaining operating
time of prosthesis in hours.
Rest mode (Stb) e.g.
58 hours, active use (Act) e.g.
29 hours For informational purposes
only
9.4.3 Status information on the display of the remote control (optional accessory)
Menu option Description Possible actions
Trip Daily step counter
(Steps with the prosthesis
side) Reset the counter by using the
key to confirm the menu
option
Step Total step counter
(Steps with the prosthesis
side) For informational purposes
only
Batt. Current prosthesis charge
level, as a percentage For informational purposes
only