Otto Bock Genium 3B1-2, Instructions For Use Manual

Page: 94 / 480

94
Beep signal Vibration signal Event Required action
10x long 10x long Battery charge level
5%
After the beep and
vibration signals, the
product switches to
empty battery mode
and then switches
off. Charge the battery.
30x long 1x long, 1x short
repeated every
3 seconds Severe error
e.g. failure of valve
drives
Possibly no switching
into safety mode (see
Page 86).
Restricted walking pos­
sible. Please note the
possible change in flex­
ion/extension resistance.
Attempt to reset this error
by connecting/discon­
necting the battery char­
ger.
If the error persists, use
of the product is prohib­
ited. The product must be
inspected immediately by
an O&P professional.
Error while charging the product
LED on
power
supply Status
LED on
battery
charger Error Resolution
Country-specific plug adapter not
fully engaged on power supply Check whether the country-specif­
ic plug adapter is fully engaged on
the power supply.
Non-functional socket Check socket with another electric
appliance.
Defective power supply The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.
No connection between battery
charger and power supply Check whether the charging cable
plug is fully engaged on the battery
charger.
Defective battery charger The battery charger and power
supply must be inspected by an
authorised Ottobock Service
Centre.