Otto Bock Genium 3B1-2, Instructions For Use Manual

Page: 67 / 480

67
7.3 Display of the current charge level
7.3.1 Display of battery charge level without additional devices
INFORMATION
The charge level cannot be displayed by turning the prosthesis over during the charging pro­
cess.
1) Turn the prosthesis by 180° (the sole of the foot must face up).
2) Hold still for 2 seconds and wait for beep signals.
Beep signal Battery charge level
5x short more than 80%
4x short 60% to 80%
3x short 40% to 60%
2x short 20% to 40%
1x short less than 20%
INFORMATION
If the Volume parameter is set to '0' in the Cockpit app or using the remote control (see
Page 76) or if mute mode (silent mode) is activated, there are no beep signals.
7.3.2 Display of the current charge level using the Cockpit app
Once the Cockpit app has been started, the current charge level is displayed in the bottom line of
the screen:
1. 38% – Charge level of battery for currently connected
component
7.3.3 Display of current charge level using remote control (optional accessory)
The current charge level is displayed in the status bar of the remote control when it is connected
and switched on:
1. – Charge level of battery for currently connected pros­
thesis
– Prosthesis is being charged
2. 68% – Charge level of battery for currently connected pros­
thesis, as a percentage